To Next PageTo Next Page
Need help?Do you have a question about the Sarlo WeedBoss BC-8 and is the answer not in the manual?
General| Brand | Sarlo |
|---|---|
| Model | WeedBoss BC-8 |
| Category | Brush Cutter |
| Language | English |
Explains symbols and pictographs used in the manual for product safety.
Instructions for attaching the cutting head, including shield and locking the gearbox.
Details on mounting the clamp and positioning the J-handle on the shaft tube.
How to accelerate, return to idle, and stop the unit using the throttle-kill switch.
Steps to attach and adjust the shoulder harness for proper balance.
Instructions for mounting the bracket and shield to the gearbox for line trimmer use.
Instructions for mounting the bracket and shield for brush cutter blade use.
Safety precautions and tips for operating the unit with a cutting blade.
How to extend trimming line by tapping the cutting attachment on the ground.
Guidance on techniques for efficient and effective grass and weed trimming.
Technique for ornamental trimming around objects using a 30° angle.
Schedule for routine maintenance tasks based on usage hours and seasons.
Safety rules and procedure for refilling and replacing trimming line.
Safety rules and procedure for replacing the brush cutter blade.
Identifies probable causes and actions for engine starting failures.
Diagnoses issues with engines that start but then stop or are hard to restart.
Preparation steps for storing the unit for extended periods or end of season.
Recommendations for fuel system care and use of fuel stabilizer during storage.
Procedures for engine preparation, including oiling and spark plug replacement.
