Sarlo WeedBoss SS-18 User Manual

CONTENTS PAGE
SAFETY RULES 1-2
ASSEMBLY 3
OPERATION 4
MAINTENANCE 5
SERVICE/ADJUSTMENTS 6
TROUBLE SHOOTING 7
NOTES 7
STORAGE 8
ILLUSTRATED PARTS LIST 9-10
WARRANTY INFORMATION 11
STRAIGHT SHAFT TRIMMER
MODEL SS-18
SARLO MANUFACTURING
P.O. BOX 1169 FORT MYERS, FL 33902
PHONE: 1-800-749-5296
™
OWNERS MANUAL
Model SS-18 Sting Trimmer
Shaft style Straight
Shaft length 62.5"
Engine 34cc 4-cycle
Briggs & Stratton
Cutting width
15" - 18"
Line size .095"/2.4 mm
Unit weight 13.2 lbs
Head type Bump feed
Starting system Easy starting 4-cycle
Handle type Standard loop
Clutch No
Shoulder harness Yes
Warranty 2 year Consumer
90 day Commercial
This unit is intended for occasional use. P/N 10005 12/03
POWERED BY

Sarlo WeedBoss SS-18 Specifications

General

Brand	Sarlo
Model	WeedBoss SS-18
Category	Trimmer
Language	English

Summary

RULES FOR SAFE OPERATION

ASSEMBLY INSTRUCTIONS

OPERATING INSTRUCTIONS

HOLDING THE TRIMMER

Proper posture and grip for safe and effective operation.

ADJUSTING TRIMMING LINE LENGTH

Method to extend trimmer line during operation via bump head.

TIPS FOR BEST TRIMMING RESULTS

Techniques for efficient grass cutting and line conservation.

DECORATIVE TRIMMING

Technique for ornamental cutting around objects using a specific angle.

MAINTENANCE

SERVICE/ADJUSTMENTS

LINE REPLACEMENT

Procedure for replacing the cutting line in the trimmer head.

REFILLING TRIMMING LINE

Step-by-step guide to loading new trimmer line onto the spool.

TROUBLESHOOTING GUIDE

STORAGE

SEASONAL STORAGE

Procedures for preparing the trimmer for long-term storage.

FUEL SYSTEM

Recommendations for fuel stabilizer and storage.

ENGINE

Steps for engine preparation before storage.

OTHER

General storage advice for fuel and unit.

ILLUSTRATED PARTS LIST

WARRANTY