Need help?Do you have a question about the Sartorius Stedim Biotech Flexel 3D Bag and is the answer not in the manual?
General| Volume Range | 50 mL to 25 L |
|---|---|
| Sterilization | Gamma irradiation |
| Application | Storage; Transport |
| Connections | Various tubing and connector options available |
| Material | Multilayer film (typically polyethylene, polyamide, and EVOH) |
Describes the objective of the instruction manual for preparing, filling, and draining bags.
Details the types of Palletanks available for use with Flexel 3D Bags.
Explains the features and design of the Flexel 3D Bag.
Step-by-step guide on preparing the Palletank for bag installation.
Instructions for correctly installing the Flexel 3D Bag into the Palletank.
Procedures for filling the 100L, 200L, and 500L Flexel 3D Bags.
Guide for safely draining the 100L, 200L, and 500L Flexel 3D Bags.
Guidelines for storing Flexel 3D bags in their original packaging.
Information on the validated shelf life of Flexel 3D Bags after gamma sterilization.
Instructions on how to report a malfunction or inadequacy with a marketed product.
Statements outlining limitations of liability and responsibilities for product use.
Details the warranty provided by Sartorius Stedim Biotech for Flexel 3D Bags.
Lists registered trademarks and patent information related to the Flexel 3D System.
To Next Page