Application Programs
In addition to the weighing functions, your scale offers a variety of application
programs for use in the rough world of everyday industrial tasks. The description of
the application programs is divided into several parts. To aid you in making
optimal use of these programs, your scale’s display will show helpful symbols and
abbreviations.
This manual contains simple working examples for each of the basic application
program modes. The settings required to run the program and to generate
documentation are given in a code table at the beginning of each example.
Your Sartorius scale can help you in counting parts, totalizing values, checking or
storing the weight of parts or of a piece count.
With these functions, your Sartorius QC counting scale can help to ease your
daily workload. The scale is set at the factory so that as a rule you do not need to
make any changes. If you have special requirements, or if you wish to use the
additional functions available in the application programs, you can change the
appropriate settings in the scale operating menu accordingly.
The procedure for setting codes is described in detail in Part 2.
Additional settings for running a particular program and displaying or printing
the data on hardcopy are listed in a table of codes before each practical example.
For your convenience, we have indicated the factory-set codes with an “*“.
One thing you should do when you want to set codes for a different program,
or when someone else has already operated the scale, is:
Select the reset function (code 9 – – 1°) to change all menu codes back to the
original factory settings.
Note:
When using verified scales as legal measuring instruments, the external
calibration function is blocked by menu code!
3–1
To Next Page
Loading...
