Memory
Memory r/s key Code 2 9 2*
Start Memory Function r/s key – press briefly
Store Data using the
Memory Function r/s key – press and hold
Symbol Displayed: P or W or +/– flashes in the display.
Note:
The flashing symbol indicates the application you are currently working in and the
values you can store.
User guide display: NEN
In the “Memory” application, you can store up to 25 values; tare values or tare
compensation (e.g. empty container weight) can be stored under Tare,
reference values under Ref, target weights under Set, checkweighing limits under
“Min” and “Max”, etc.
General Functions in the Memory Program
Function/Application Entry Mode User Data
Guide Output
Display ID
Load the last memory
position selected
(default: the1st position) r/s key MEM –
Storing values in Memory position 1 to
a memory position: 25 + r/s key
Reference value “wRef” = Ref – press and hold
+ u/w key
or
Tare value = Tare o/t key MEM –
or
Target weight = Set z/T key
Free memory = Free
* = factory setting
3–32
To Next Page
Loading...
