Programs (Applications)
Counting (page 3–4)
Counting using your choice of reference piece count or reference weight.
Tare Memory (page 3–13)
Storing weighed values or numeric-key input of a weight with simultaneous
subtraction of the stored value from the displayed value (subtraction of container
weight).
Totalizing (page 3–15)
Summation of weighed values and piece counts (breaking bulk and portioning).
Over/Under Checkweighing (page 3–20)
Check net value or difference of weighed or counting values with visual support
(filling guide) using analog display, e.g. for counting parts.
Individual Data ID Code (ID), C*, NUM (page 3–29)
Individual14-digit entry of work order, article, customer, position or batch numbers.
Optional 6-digit ID, e.g. for entry of “Article No:”.
Memory (page 3–31)
User-definable assignment of and access to 25 memory modules for tare weights,
part weights or target values.
Please note:
A number entered manually without a decimal point is always a piece count!
A number entered manually with a decimal point is always a weight value!
3–3
To Next Page
Loading...
