8
3 9 Average Pieceweight Output
3 9 1 blocket
3 9 2 Display by pressing key
3 10 Accuracy Test
3 10 1 without
3 10 2 99,0 % (100 digits)
3 10 3 99,5 % (200 digits)
3 10 4 99,8 % (500 digits)
3 10 5 99,9 % (1000 digits)
3 11 Criterion for Storing Ref. Weight and Tare Value
3 11 1 At stability
3 11 2 At "increased" stability
3 12 Reference Optimizing
3 12 1 Blocked
3 12 2 Manual
3 12 3 Automatic
3 13 Forced Print when M+ is Pressed
3 13 1 free
3 13 2 blocked
4 CHECKWEIGHING - APPLIKATIONSPARAMETER
4 2 Printout
4 2 1 free
4 2 2 blocked
4 3 Control through Control Lines
4 3 1 Only in check range
4 3 2 Always
4 3 3 Only at stability in check range
4 3 4 Only at stability
5 DATA INTERFACE PARAMETER
5 1 Baud Rate
5 1 1 150 baud
5 1 2 300 baud
5 1 3 600 baud
5 1 4 1200 baud
5 1 5 2400 baud
5 1 6 4800 baud
5 1 7 9600 baud
5 1 8 19200 baud
5 2 Parity Bit
5 2 1 Mark
5 2 2 Space
5 2 3 Odd
5 2 4 Even
5 3 Number of Stop Bits
5 3 1 1 stop bit
5 3 2 2 stop bits
5 4 Handshake Mode
5 4 1 Software
5 4 2 Hardware, 2 characters after CTS
To Next Page
Loading...
