Sase SC8E - Page 23

Item No Part No Description Quantity
1 NB.10.114 M8 X 20 Hex Screw 1
2 NB.30.403 M8 X 30 Fender Washer 1
3 SC.08.000 Black SC8E Scarifier Chassis 1
4 SC.08.113 Upper Toothed Electric Pulley FR200 1
5 SC.08.117 Short T-bolt FR 200 8
6 SC.08.120 Mounting Pair Rail FR200 1
7 SC.08.121 Electric Mounting Plate FR200 2
8 ZZ.M3559T Electric Motor 3 Phase FR 200 SC8E 1
9 NB.19.101 8-32 X 3/4 Pan Head Screw 2
10 NB.20.133 8-32 Nyloc Nut 2
11 795.00.76 Mounting Emergency Stop Bracket FR200 1
12 795.00.04 3/4" Liquidtight Flexible Conduit 4FT
13 795.00.05 3/4" L/T Bullet Connector LT75P 1
14 795.00.06 3/4" W/R Black SLRN21 1
15 795.00.08 3/4-IN 45 Bullet L/T Connector 3
16 795.00.10 18 Gauge Wire Nut Yellow 1
17 795.00.11 20 Gauge Wire Nut Orange 1
18 795.00.12 Zip Tie Black 11" X 0.125" 2
19 795.00.19 Emergency Stop Switch Tether with Cord 1
20 795.00.20 16-14 AWG Bullet Connector Blue Nylon 1
21 795.00.21 22-18 AWG Ring-1/4" Stud Red Nylon 1
22 795.00.22 22-18 AWG Butt Connector Red Vinyl 2
23 795.00.23 3/8" Heat Shrink Tubing Black 4 IN
24 AIW.12X4CRD Power Cord 12/4 6 FT
25 AIW.16X2CRD Power Cord 16/2 1 FT
26 MCC.27AA440 Shunt Relay Module for 440 V 1
27 MCC.27.63A 6.3 Amp Switch 1
28 MCC.27.KAZ Switch Box Enclosure for 25A Switch 1
29 NB.19.101 8-32 X 3/4 Pan Head Screw 2
30 NB.20.133 8-32 Nyloc Nut 2
SC8E 460V Three Phase
SC.08.046
Emergency Bracket
Dead Man's Switch & Wiring
*Orient the upper pulley, nipple toward motor