IMPORTANT SAFETY INFORMATION-----------------------------------------
• Always turn off power at the main power source by removing the fuse,
or switching the circuit breaker to the off position before installing,
removing, cleaning, or servicing this thermostat.
• Read all of the information in this manual before installing this
• Use a professional contractor to install this thermostat.
• This is a 24VAC low-voltage thermostat
DO NOT INSTALL ON VOLTAGES HIGHER THAN 30 VAC.
• ALL wiring must conform to local and national building and electrical
• Do not short (jumper) across terminals on the gas valve or at the
system control to test installation. This will damage the thermostat and
To Next Page
Loading...
