1© Copyright 2022 Satco Products, Inc. 7/22, v2.1
LED SMART SECURITY FLOODLIGHT
& CAMERA
Models: 65/900, 65/901, 65/902
Satco Products, Inc.
Brentwood, NY 11717
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
Thank you for choosing our Starsh Security Floodlight with Camera.
Getting started is easy.
1. Parts Included
WARNING: Risk of Fire or Electric Shock.
• This xture must be wired in accordance with the National Electrical Code and applicable local codes and ordinances.
Proper grounding is required to insure personal safety. Carefully observe grounding procedure under installation section.
• Make certain power is OFF before starting installation or attempting any maintenance. Risk of re/electric shock. If not
qualied, consult an electrician.
• For proper weatherproof function, all gaskets must be seated properly and all screws inserted and tightened rmly. Apply
weatherproof silicone sealant around the edge of the Back Box and/or Junction Box. This is especially important with an
uneven wall surface. Silicone all plugs and unused conduit entries.
• Be sure xture temperature is cool enough to touch. Do not clean or maintain while xture is energized. Clean glass lens
with non-abrasive glass cleaning solution. Do not open xture to clean the LED. Do not touch the LED.
2. Product Details
3. Safety Instructions
Security Flood
Camera
Gasket
M4*14 Bracket
Screws
Wire Nuts
1900 Lm Output
Light Lock Collar
Microphone
Lens
LED Indicator
Speaker
PIR Motion Detector
LED Bullet Head
Adjustment Locknut
Camera Lock Collar
Micro SD Card Slot
Reset
WIRING: If wiring does not include a ground wire, consult your local electrical code for approved grounding methods.
For proper connection, place wire nut over wires and twist clockwise until tight.
To Next Page
General