EasyManua.ls Logo

Satel GFU30 - Modem Settings; Default Settings

Satel GFU30
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GFU30 User Guide
Version 1.0
15
8 MODEM SETTINGS
8.1 Default settings
The radio modem is delivered with the following default settings (unless otherwise specifically
ordered):
DEFAULT VALUES OF THE ADJUSTABLE SETTINGS ( the user can change these settings later on )
Setting
Default value
Range
Radio frequency
Operating TX frequency
438.000 MHz
403 … 473 MHz
Operating RX frequency
438.000 MHz
403 … 473 MHz
Reference frequency
438.000 MHz
403 … 473 MHz
Channel spacing
25 kHz
12.5 kHz or 25 kHz
Radio settings
TX power
1 W
0.1, 0.2, 0.5 or 1 W
Signal threshold
-115 dBm
-80 … -118 dBm
FCS
OFF
ON / OFF
TX-start delay
0 ms
0 … 65535 ms
Radio compatibility
SATEL 8FSK-2
SATELLINE 3AS
PacCrest-4FSK
PacCrest-GMSK
TrimTalk450s(P)
TrimTalk450s(T)
PacCrest-FST
SATELLINE 2ASx
SATELLINE 3AS-1
SOUTH
SATEL 8FSK-1
SATEL 8FSK-2
SATEL 16FSK-1
Addressing
RX address
OFF
ON / OFF
TX address
OFF
ON / OFF
Serial port
Data speed
115200 bps
1200 … 115200 bps
Data bits
8
8
Parity bits
None
None, Even, Odd
Stop bits
1
1

Related product manuals