Need help?Do you have a question about the Sathero SH-400HD and is the answer not in the manual?
General| Model | SH-400HD |
|---|---|
| Type | Satellite Finder |
| Display | 3.5 inch LCD |
| Compatibility | DVB-S/S2 |
| Input Impedance | 75Ω |
| Sound and Light Alarm | Yes |
| Power Source | DC 12V/1.5A |
| Interface | AV in/out |
| Input Frequency | 950-2150 MHz |
| Input Level | -65dBm to -25dBm |
| Measurement Type | Signal Quality |
| LNB Power Supply | 13/18V |
| DiSEqC | 1.0/1.1/1.2 |
Details USB, HDMI, and satellite signal input ports for device connection and data transfer.
Describes the LCD screen and status LEDs indicating signal lock and power status.
Explains the function, menu, exit, navigation, and OK keys for device operation.
Instructions for initial charging, battery life, and turning the satellite finder on and off.
Guidance on language selection, factory reset, and inputting local longitude and latitude.
Steps for selecting satellites, LNB types, parameters, and detecting signals effectively.
Process for upgrading firmware and parameters via USB drive.
Explains the meaning of various signal strength and quality parameters displayed.
Guidelines for connecting cables and installing the antenna for optimal signal acquisition.
Critical warnings regarding device handling, water, fire, and upgrading safety procedures.
Advice on using original batteries, disposal, and charger safety.
Details LNB input range, impedance, and demodulator capabilities.
Information on connectors, supply voltage, battery, and charger specifications.
Covers device dimensions, weight, and operating/storage temperatures.
To Next Page