9
Cautions
- Be careful not to burn yourself when measuring high temperature.
- If you need to measure both objects having a large difference (high and low temperatures), do not
continuously carry on both measurements. Return the temperature of the temperature sensor (probe)
to the normal temperature once and then start next measurement. Otherwise, the temperature
sensor deterioration will be accelerated
- A sudden change of the ambient temperature of the unit may adversely affect the measurement
accuracy. For the accurate measurement, start the measurement after leaving the unit in the ambient
temperature.
6-6. How to mount the unit on a wall (No. 8078-22 does not have the hole for wall-mount)
After fitting the screw on a wall or a column, mount the unit by using the hole for mount.
NB: Shake the unit lightly to the left and right to check the unit does not fall.
Do not strongly pull the unit mounted on a wall. If so, the hook may come off from the wall.
7. Functions
7-1. Operation procedure
The following operations are performed by key operation
①
Temperature
measurement
To Next Page
Loading...