19
Internet environment : .NET Framework 3.5
When .NET Framework 3.5 is not active, install it via internet at installation of this software.
• Installing software
1. Confirm the OS (Windows7/8/8.1/10) to be used with your computer and also if its system is 32 bit or 64 bit
(Select “System” from “Control Panel” to confirm it)
2. Insert the CD-ROM included with the unit into the CD drive on your computer.
3. Double-click the installer in the CD-ROM to execute the setup. Be sure to check the proper installer to the
OS of your computer
. For 32 bit system or Windows XP: "4ch Datalogger for Windows Ver. 1.1 Setup_32bit.exe"
. For 64 bit system : "4ch Datalogger for Windows Ver. 1.1 Setup_64bit.exe"
NB.: The extension of ".exe" may not be displayed depending on the computer settings.
4. Preparing for installation
1) For Windows 8/8.1/10
① The screen below may appear,
Click “More Info” to display the next screen.
NB.: This screen may not be displayed depending on the computer settings
.
Click “Run anyway” to proceed.
② A confirmation message on User Account Control appears. Click “Yes”
NB.: This screen may not be displayed depending on the computer settings.
To Next Page
Loading...