Satran MK3 - User Manual

SATRAN
MK3 USER MANUAL
SAtellite TRacking Antenna
Open source 3D-printable azimuth/elevation antenna rotator
www.satran.io
Within Europe only legal for use by
authorities or licensed radio amateurs
Always read and understand this manual before use
2022-08-23 page 1

Summary

Safety Precautions and Instructions

Getting Started

Wi-Fi Connection and Network Setup

Mounting the Device and Antenna

Reset to Factory Defaults

Calibration of Sensors

Calibrating Azimuth Position Limits

Set the Azimuth min (North) and max (CW) values via the web interface.

Calibrating Elevation Position Limits

Set the Elevation min (horizontal) and max (vertical) values via the web interface.

Controlling Manually via Browser Interface

Control with the Android App

Control with Gpredict (hamlib;rotctld)

Setting up Gpredict Interfaces

Configure Gpredict by adding the Satran rotator with its IP address and port.

Engaging and Tracking Satellites

Connect to the rotator in Gpredict, select a satellite, and enable tracking.

Satran MK3 Specifications

General

Brand	Satran
Model	MK3
Category	Racks & Stands
Language	English