SattControl SattCon 05-45

Need help?

Do you have a question about the SattControl SattCon 05-45 and is the answer not in the manual?

Summary

2 Basic Units

2.1 Basic Unit SattCon 05-25;45

Details the central unit board, input/output board, and communication board.

2.2 Technical Data, SattCon 05-25;45

2.3 Basic Unit, SattCon OP45

2.4 Technical Data, SattCon OP45

Interference Class

Specifies interference standards applied.

Form of Protection

States the IP rating.

3 Central Board, CU05

3.1 Connecting the Central Board

3.2 Jumping for Pulse Input and Settings

3.3 Serial Channels

RS485 and RS422

3.4 Power Supply

3.5 Battery Backup

4 Input and Output Board for SattCon 05-25;45

4.1 Connection of Input;Output Board

Explains connecting the I/O board to the central unit board CU05.

4.3 Power Supply for Inputs and Outputs

5 Communication Boards DX232;DX485

5.1 Connecting a Communication Board

5.3 RS232 C (DX232)

5.4 RS485 (DX485)

5.5 Technical Data

6 Digital Expansion Units

6.1 Inputs;Outputs, SD32 D

Details the inputs and outputs of the SD32D unit.

6.2 Connecting SD32 D to the Basic Unit

Explains how to connect the SD32D expansion unit.

6.3 Power Supply to SD32 D

6.4 Technical Data, SD32 D

7 Digital Test Panel, PTC05

7.1 Connection

Explains how to connect the PTC05 test panel.

7.2 Technical Data

8 Analogue Expansion Unit, XACV-B

8.1 Connection

8.2 Power Supply

8.3 Technical Data

9 Analogue Test Panel, ATC05

9.1 Connection

9.2 Power Supply

10 PT100 Interface, IA05

10.1 Connection

10.2 Power Supply

10.3 Technical Data

11 Pulse Interface, IP05

11.1 Connection

11.3 Power Supply

11.4 Technical Data

13 Power Supply to External Equipment

14 Interference Sources, Cabinet Mountings and Grounding

14.1 Interference Sources

Lists common sources of interference and protection methods.

14.2 Cabinet Mounting

Provides recommendations for mounting units in cabinets.

14.3 Grounding