If your vehicle has remote vehicle start and is
started using the remote keyless entry transmitter,
the front heated seats will be turned on to the
high setting if it is cold outside. See ″Remote
Vehicle Start″ under Remote Keyless Entry (RKE)
System Operation on page 100. When the key
is inserted into the ignition and the ignition
is turned on, the heated seat feature will turn off.
To turn the heated seat feature back on, press
the desired button.
Memory Seat and Mirrors
Your vehicle may have the memory package.
The controls for this feature are located on the
driver’s door panel, and are used to program and
recall memory settings for the driver’s seat and
outside mirrors.
To save your positions in memory, do the
following:
1. Adjust the driver’s seat, including the seatback
recliner and lumbar and both outside mirrors
to a comfortable position.
See Outside Power Mirrors on page 142 for
more information.
Not all mirrors will have the ability to save and
recall the mirror positions.
2. Press and hold button 1 until two beeps let
you know that the position has been stored.
13
To Next Page
Loading...
