4. Attach the sealant filling hose (A) onto the tire
valve stem. Turn it clockwise until it is tight.
Make sure the inflator kit on/off switch (B) is in
the O (off) position.
5. Plug the air compressor accessory plug (C)
into an accessory power outlet in the vehicle.
See Accessory Power Outlet(s) on page 154
for more information.
{CAUTION:
Idling the engine in a closed-in place or
with the climate control system off can
cause deadly carbon monoxide (CO).
See Engine Exhaust on page 125.
6. Start the vehicle. See Starting the Engine
(Automatic Engine Start/Stop) on page 113
for more information. The vehicle must
be running while using the air compressor.
{CAUTION:
Inflating something too much can make it
explode, and you or others could be
injured. Be sure to read the inflator
instructions, and inflate the tire to its
recommended pressure. Do not exceed
36 psi (248 kPa).
363
To Next Page
Loading...
