4. Turn the sealant canister so the inflator
filling hose is aligned with the slot in the
compressor.
5. Lift the sealant canister from the compressor
and replace with a new sealant canister.
See your retailer for more information.
To install a new sealant canister, do the following:
1. Align the sealant filling hose with the slot in
the air compressor.
2. Push the sealant canister down and turn it
clockwise.
3. Wrap the sealant filling hose around the air
compressor channel to stow it in its original
location.
4. Push the air compressor inflator hose onto the
sealant canister inlet and push the lever down.
369
To Next Page
Loading...
