Removing the Spare Tire and Tools
The equipment you will need is located in the trunk.
1. Open the trunk. See Trunk on page 2-13.
2. Remove the spare tire cover.
3. Turn the wing nut counterclockwise and remove it.
Then remove the compact spare tire. See Compact
Spare Tire on page 5-80.
4. Remove the wing nut holding the jack in place.
5. Remove the extension bolt that is clipped to
the jack. You need this later to store the flat tire.
6. Remove the jack and wheel wrench from the trunk.
The tools you will be using include the wheel wrench (A)
and jack (B).
5-69
To Next Page
Loading...
