INK JET PRINTER OPERATION
5-13
Reset Serial Number
This function is only to change the current value of serial number,
cannot change other parameter of the serial number.
The steps of resetting serial number are as below;
1. Enter<Edit Message-2>, select <Reset Serial Number>, it displays
as below:
2. Use <Direction Key> to move the Parameter Setup Zone to the
position of the serial number that requires to be changed, and the
serial number will be showed in reverse video type.
3. Use <Adjust Key> to “Change Start Value” and choose “yes”, and then
use right
<Direction Key> to move to the “Current Value” to insert a
new value.
4. Repeat the steps above to change current values for other serial
number.
5. After changing choose “OK” to finish.
CAUTION
: After “Reset Serial Number” finished, the “repeat
times” (when it is not 1) of this serial number will be counted again.
Status:
Printer is ready
Restore Serial Numbe
2007 / 12 / 13 12:00
2007 / 12/ 13
12 : 24 : 36
0013
Name
Change Start Value
1
no
yes
0
076
0070
OK (F1)
Cancel (F2)
Exit (F3)
Current Flow Time: 4200
To Next Page
Loading...