Sauber 1-8100 Series - User Manual

Questions and Answers

S
Samantha FarmerAug 15, 2025
How to fix a Sauber 1-8100 Washer that won't start?
- J
  James LinAug 16, 2025
  If your Sauber Washer isn't starting, several factors could be at play. First, ensure the machine is properly plugged into a working power outlet. Check your home's fuses and replace any that are faulty. Verify that there is mains power. Make sure you've pressed the Start/Pause button and that the program dial is set to the desired position, not 'stop'. Finally, confirm that the machine door is completely closed.
C
courtney02Aug 18, 2025
Why is my Sauber 1-8100 not taking in water?
- J
  Joshua SmithAug 18, 2025
  If your Sauber Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist it if necessary. Also, the water inlet hose or the inlet filters might be clogged, so clean them thoroughly. Ensure that the machine door is completely closed as well.
R
Rebecca WebbAug 21, 2025
How to reduce vibration in my Sauber Washer?
- J
  Johnny FloydAug 22, 2025
  Excessive vibration in your Sauber Washer can be due to several reasons. Ensure the feet of the machine are properly adjusted for stability. Check that the transit bolts, which are fitted for transportation, have been removed. Avoid overloading the machine with laundry and ensure the laundry is spread evenly inside the drum. Also, avoid placing your washing machine on a hard surface.
C
Cynthia FordAug 25, 2025
What to do if my Sauber 1-8100 Washer won't discharge water?
- N
  nmcdonaldAug 25, 2025
  If your Sauber Washer isn't discharging water, the drain hose might be clogged or twisted, so check and clear or untwist it. Another common cause is a clogged pump filter, which should be cleaned. Also, ensure that your laundry isn't too tightly packed in the drum; spread it evenly.
M
Mary WilliamsAug 27, 2025
Why is my Sauber 1-8100 not cleaning clothes properly?
- D
  Dennis PowersAug 27, 2025
  An unsatisfactory washing result from your Sauber Washer can stem from a few issues. Your washing might be too dirty for the selected program; refer to the program tables to choose a more appropriate one. You may not be using enough detergent, so follow the instructions on the detergent packaging. Also, avoid overloading the machine beyond the maximum capacity for the selected program. If you have hard water, increase the amount of detergent following the manufacturer’s instructions. Ensure that your laundry is spread out.
K
Karen ButlerAug 30, 2025
How to reduce excessive foam in my Sauber 1-8100 Washer detergent drawer?
- G
  Gary JenkinsAug 30, 2025
  Excessive foam in the detergent drawer of your Sauber Washer is usually caused by using too much detergent or using the wrong type of detergent. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Make sure you only use detergents specifically produced for automatic washing machines.
K
Kristin RobinsonSep 3, 2025
Why is the spin cycle delayed on my Sauber 1-8100 Washer?
- E
  Emily GibsonSep 3, 2025
  If the spin cycle on your Sauber Washer is delayed or doesn't occur, it might not be a fault. The Unbalanced load control system may have been activated. This system attempts to spread your laundry evenly. The spin cycle will begin once your laundry is properly spread. For future washes, load the drum evenly to prevent this.
C
Cameron MorrisSep 5, 2025
Why does my laundry have detergent residue after washing in my Sauber 1-8100 Washer?
- K
  Kylie CervantesSep 5, 2025
  If your laundry has detergent residue after washing in your Sauber Washer, it may be due to non-dissolving particles in some detergents appearing as white spots. To resolve this, perform an extra rinse cycle or clean your laundry with a brush after it dries.
M
Michelle ReeseSep 8, 2025
Why does water discharge immediately when my Sauber 1-8100 Washer is loaded?
- C
  Catherine ScottSep 9, 2025
  If water discharges as soon as your Sauber Washer is loaded, it's likely because the end of the water drain hose is too low. Check that the drain hose is at a suitable height.
D
Darren WashingtonSep 12, 2025
Why are there grey spots on my laundry after washing in my Sauber 1-8100?
- X
  xaviergutierrezSep 12, 2025
  If grey spots appear on your laundry after washing in your Sauber Washer, it could be due to untreated oil, cream, or ointment on the laundry. To address this, use the amount of detergent as instructed on the packaging in the next wash.

Summary

SAFETY INSTRUCTIONS

General Safety Warnings

General safety advice for operating the washing machine.

During Use Precautions

Guidelines and precautions for using the washing machine.

Packaging and Environmental Disposal

Information on packaging materials and environmental disposal.

Energy and Water Saving Tips

Tips for efficient energy and water usage.

Technical Specifications

Appliance Overview

Identification of the main parts of the washing machine.

Detailed Technical Data

Specific technical parameters and values for the appliance.

Installation Guide

Transit Bolt Removal

Steps to remove transit bolts before first use.

Leveling the Machine

How to level the machine using adjustable feet.

Electrical Connection

Instructions for connecting the machine to the power supply.

Water Inlet Hose Connection

Guide for connecting the water inlet hose.

Water Discharge Connection

How to connect the water drain hose.

Control Panel Overview

Detergent Drawer Details

Details of the detergent drawer compartments and usage.

Detergent Compartment Guide

Explanation of detergent drawer sections for different types of detergents.

Program Dial Operation

How to select washing programmes using the dial.

Electronic Display Symbols

Explanation of the washing machine's electronic display indicators.

Using Your Washing Machine

Preparing Laundry for Wash

Instructions for sorting and preparing laundry before washing.

Loading the Drum

Guidance on loading the laundry into the drum.

Adding Detergent and Softener

How to correctly add detergent and softener.

Operating the Machine

Step-by-step guide to operating the washing machine.

Selecting a Wash Programme

How to choose the most suitable wash programme.

Half-Load Detection System

Explanation of the automatic half-load detection feature.

Additional Wash Functions

Overview and selection of extra wash functions.

No Spin Function

How to disable the spin cycle.

Anti-Allergic Function

Function for allergy sufferers, uses hot water rinses.

Easy Ironing Function

Function to reduce garment creasing.

Pre-Wash Function

Function for heavily soiled laundry.

Extra Rinse Function

Adds an extra rinse cycle.

Cold Wash Function

Option to use cold water for washing.

Rapid Wash Function

For shorter wash times, less energy and water.

Start;Pause Button Operation

How to start and pause a wash cycle.

Child Lock Feature

How to activate and deactivate the child lock feature.

Cancelling a Wash Programme

Steps to cancel a running wash programme.

Programme End Procedures

What happens when a wash programme finishes.

Programme Table

Important Programme Information

Key points regarding detergent use, cleaning, and maintenance.

Cleaning and Maintenance

Cleaning and Maintenance Warnings

Safety warnings before cleaning or maintenance.

Water Inlet Filter Cleaning

How to clean the water inlet filters.

Pump Filter Cleaning

Procedure for cleaning the pump filter.

Detergent Drawer Cleaning

How to remove and clean the detergent drawer.

Component Cleaning

Flush Stopper Cleaning

Cleaning the flush stopper for residue.

External Body Cleaning

How to clean the external casing of the machine.

Drum Cleaning

How to clean the drum and remove rust stains.

Troubleshooting Guide

Machine Not Starting

Troubleshooting for when the washing machine does not start.

Water Intake Issues

Reasons and fixes for lack of water intake.

Water Discharge Issues

Solutions for water discharge problems.

Machine Vibration Problems

Causes and remedies for excessive machine vibration.

Excessive Foam in Drawer

How to address excessive foam formation in the drawer.

Poor Washing Results

Troubleshooting tips for poor washing outcomes.

Hard Water Washing Issues

Addressing washing issues caused by hard water.

Overloading Wash Issues

Solutions for washing problems due to overloaded drum.

Immediate Water Discharge

Troubleshooting for immediate water discharge upon filling.

No Water During Wash Cycle

Reasons why no water enters the drum during the cycle.

Detergent Residue on Laundry

Solutions for detergent residue on laundry.

Grey Spots on Laundry

How to deal with grey spots on clothes.

Spin Cycle Timing Issues

Issues related to the spin cycle timing.

Automatic Fault Warnings

Fault Code E01: Door Error

Fault code E01 - door not shut properly.

Fault Code E02: Water Supply Error

Fault code E02 - low water pressure or level.

Fault Code E03: Pump Error

Fault code E03 - pump fault or filter clog.

Fault Code E04: Excess Water Error

Fault code E04 - excess water in the machine.

Sauber 1-8100 Series Specifications

General

Capacity	8 kg
Spin Speed	1400 RPM
Child Lock	Yes
Type	Front Load
Energy Rating	A+++
Dimensions (HxWxD)	850 x 600 x 550 mm
Programs	Cotton, Synthetics, Delicates, Wool, Hand Wash, Mix, Jeans, Sport, Anti-Allergy
Delay Start	Yes

Related product manuals

Sauber 1-6101 Series

88 pages

Sauber 1-5100 Series