Sauder 411312 - Page 11

Step 6
å
Slide the FEET (31E and 32E) into the notches in the
SKIRTS (J and K).
å
Use a hammer to drive a PROPEL NUT (14M) into
the holes in the FEET (31E and 32E). Now, turn an
ADJUSTABLE GLIDE (18E) into each PROPEL NUT.
411312www.sauder.com/services
Page 11
J
K
K
18E
14M
31E
31E
32E
32E
(4 used)