å
Fasten the TRAYS (BB) to the CENTER DOOR (J) and LEFT
DOOR (L). Use four BLACK 9/16" LARGE HEAD SCREWS (II).
å
Insert the TRAY DIVIDERS (CC) into the grooves of the
TRAYS (BB) as needed.
Step 13
411615www.sauder.com/services
Page 17
BLACK 9/16" LARGE HEAD SCREW
(4 used for the TRAYS)
II
D2
E
IMPORTANT
Raise the FLIP-UP TOP (E) level with the TOP (D2) and open the
CENTER/LEFT DOOR (J and L) underneath it for support. Push
the SLIDE CATCH bolt into the hole in the FLIP-UP TOP.
L
BB
BB
J
CC
To Next Page
Loading...
