Sauder 411802 - Page 8

Step
å
Fasten the LEFT END (B) to the TOP (C) and SHELF (F).
Tighten four TWIST-LOCK® FASTENERS.
Step 3
Page 8
B
C
1. Insert the dowel end of the FASTENER into the hole of
the adjoining part.
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as
tight as possible.
Finished edge
Edge with
TWIST-LOCK®
FASTENERS
Dowel end
Long fi nished edge
Surface with
TWIST-LOCK®
FASTENERS
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
F
Surface with
TWIST-LOCK®
FASTENERS
How to use this TWIST-LOCK
®
FASTENER