Step 10
411985 www.sauder.com/servicesPage 14
å
NOTE: To raise a corner of the unit, turn the ADJUSTABLE GLIDE counter-clockwise. To lower a corner,
turn the ADJUSTABLE GLIDE clockwise.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations
of your choice in the ENDS (A2 and B2). Set the ADJUSTABLE SHELVES (G) onto the METAL PINS.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
And to celebrate, why not share your success story?
1R
2R
A2
B2
G
G
No load
50 lbs.
25 lbs.
25 lbs.
(16 used)
G
25 lbs.
G
25 lbs.
To Next Page
Loading...
