Sauder 413852 - Assembly Tools Required; Part Identification

Table of Contents Assembly Tools Required
2-3
4
5-30
31-34
35-38
39
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
413852 www.sauder.com/servicePage 2
Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
A RIGHT END (1)
A2 BOTTOM (2)
B LEFT END (1)
B2 BOTTOM SUPPORT (2)
B19 DRAWER BOTTOM (2)
C2 LOWER UPRIGHT (1)
D UPRIGHT (2)
D44 RIGHT DRAWER SIDE (2)
D45 LEFT DRAWER SIDE (2)
D453 DRAWER DIVIDER (2)
D476 DRAWER BACK (2)
E HEADBOARD (1)
F FOOTBOARD (1)
G2 UPPER FRONT PANEL (1)
H2 LOWER FRONT PANEL (1)
I2 BACK PANEL (1)
J TOP (1)
J2 SLAT (4)
L SHELF (1)
M SHELF BRACE (1)
M67
DRAWER BRACE (2)
(Hidden part using recycled
material. Color may vary.)
N LOWER BRACE (1)
R ADJUSTABLE SHELF (1)
S LEFT DRAWER FRONT (1)
T RIGHT DRAWER FRONT (1)
X BACK (1)