å
Fasten a DRAWER RIGHT (35GC) and DRAWER
LEFT (35GD) to the DRAWER SIDES (D44 and D45). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S).
å
Slide a DRAWER DIVIDER (D453) into the SUPPORT
PINS on the RIGHT DRAWER FRONT (T) and
DRAWER BACK (D476).
å
Repeat this step for the other drawer.
Step 25
413852www.sauder.com/service
Page 29
Roller end
Roller end
D44
D45
T
Finished edge
D453
D476
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
3S
(4 screws per drawer)
To Next Page
Loading...
