Sauder 414129 - Page 16

Step 12
å
Fasten the Z-PLATES (75G) to the RAILS (N2, O2, T, and U).
Use eight BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: The Z-PLATES will wrap around the bottom edges of
the RAILS (N2, O2, T, and U).
414129 www.sauder.com/servicePage 16
U
T
N2
O2
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
1S
75G
75G