Sauder 414129 - Page 18

Step 14
å
Fasten the HEADBOARD TOP (E3) to the ENDS (A3 and B3).
Use four BLACK 1-15/16" FLAT HEAD SCREWS (113S).
å
NOTE: Be sure the METAL PINS in the SLATS (I3) insert into
the HEADBOARD TOP.
414129 www.sauder.com/servicePage 18
I3
I3
A3
B3 E3
BLACK 1-15/16" FLAT HEAD SCREW
(4 used in this step)
113S
Finished surface
113S
Edge without holes