Sauder 414129 - Page 9

å
Fasten the remaining two SMALL SUPPORTS (X) to the
HEADBOARD RAILS (T and U). Use twelve BROWN 1"
FLAT HEAD SCREWS (12S).
å
NOTE: Start each SCREW a few turns before tightening
any of them.
Step 5
414129www.sauder.com/service
Page 9
U
T
X
X
BROWN 1" FLAT HEAD SCREW
(12 used in this step)
12S
These holes
must be here.
These holes
must be here.