Sauder 415546 - Step 7: Connect Rails to Supports

Step 7
å
Fasten the RAILS (N) to the SUPPORTS (K2). Use sixteen
SILVER 1-1/8" FLAT HEAD SCREWS (10S).
N
N
N
N
K2
K2
Finished surface
Finished surface
F
F
SILVER 1-1/8" FLAT HEAD SCREW
(16 used in this step)
10S
Unfi nished surface
Unfi nished surface
The LARGE SUPPORTS (F)
must be on the fl oor.
415546www.sauder.com/services
Pae 11