To Next PageTo Next Page
Need help?Do you have a question about the Sauder 415546 and is the answer not in the manual?
Assemble unit on carpeted floor or carton. Insert 4 HIDDEN CAMS into DRAWER BRACES. Screw 4 CAM SCREWS into DRAWER FRONTS.
Fasten RAILS (N) to LEGS (D2) using 24 SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Fasten SMALL SUPPORTS (L) to RAILS (N) using 16 SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Fasten SUPPORTS (K2) to HEADBOARD (A2) and FOOTBOARD (B2) using 16 SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Fasten SUPPORTS (K2) to LARGE SUPPORTS (F) using 8 SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Fasten remaining SUPPORTS (K2) to SUPPORTS (K2) using 8 BLACK 1-15/16" FLAT HEAD SCREWS (113S).
Fasten RAILS (N) to SUPPORTS (K2) using 16 SILVER 1-1/8" FLAT HEAD SCREWS (10S).
Attach METAL BRACKETS (4G) to FOOTBOARD (B2), then attach FOOTBOARD to RAILS (N) and LEGS (D2).
Attach HEADBOARD (A2) to RAILS (N) and PLATFORMS (C) to SUPPORTS (K2) using specified screws.
Fasten SWIVEL ROLLERS (11M) to DRAWER BRACES (G) using WASHERS (101) and PAN HEAD SCREWS (25S).
Assemble drawer sides, bottom, braces, and back using cams and screws. Repeat for second drawer.
Attach PULLS (45K) to DRAWER FRONT (E2) using MACHINE SCREWS (24S). Repeat for other drawer.
Note on positioning drawers on either the right or left side of the unit.
Insert drawers, final cleaning, and care instructions. Remove headboard if needed before moving.
Sauder provides limited warranty coverage for defects in materials or workmanship for one year.
Register your product online for immediate service, replacement parts, and assembly tips.
General| Product Name | Sauder 415546 |
|---|---|
| Category | Indoor Furnishing |
| Bookcase | Yes |
| Style | Traditional |
| Number of Shelves | 5 |
| Adjustable Shelves | Yes |
| Material | Engineered Wood |
| Assembly Required | Yes |
