Sauder 415546 - Step 2: Attach Rails to Legs

Step 2
å
Fasten the RAILS (N) to the LEGS (D2). Use twenty-four
SILVER 1-1/8" FLAT HEAD SCREWS (10S) throuh the
larer holes in the RAILS (N).
Short fi nished ede
Short fi nished ede
Short fi nished ede
D2
D2
D2
Use the
lare holes
Use the
lare holes
Unfi nished surface
Unfi nished surface
Short unfi nished ede
Short unfi nished ede
Short unfi nished ede
All LEGS (D2) should have the
surface with holes facing up.
D2
D2
D2
Use the
lare holes
Use the
lare holes
Unfi nished surface
Unfi nished surface
SILVER 1-1/8" FLAT HEAD SCREW
(24 used in this step)
10S
N
N
N
N
415546 www.sauder.com/servicesPae 6