Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
Push thirty-six HIDDEN CAMS (1F) into the ENDS (A),
UPRIGHTS (B), SMALL UPRIGHTS (C), BOTTOM (E),
and SHELF (F). Then, insert the metal end of a
CAM DOWEL (2F) into each HIDDEN CAM except in
the long edges of the ENDS (A) and SHELF (F).
Arrow
1F
2F
(36 used)
(20 used)
Arrow
1F
2F
Do not tighten the HIDDEN CAMS in this step.
Do not insert CAM DOWELS into these edges.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
C
C
E
F
A
A
B
B
418344www.sauder.com/services
Page 5
To Next Page