Sauder Computer Credenza 404944 - Page 2

Table of Contents Assembly Tools Required
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
2-3
4-5
6-32
33-36
37-40
41-42
43
Part Identifi cation
Hardware Identifi cation
Assembly Steps
Français
Español
Safety
Warranty
A RIGHT END (1)
B LEFT END (1)
C RIGHT UPRIGHT (1)
D LEFT UPRIGHT (1)
E TOP (1)
F BOTTOM (2)
G MODESTY PANEL (1)
H BACK (2)
I2 DOOR (1)
J ADJUSTABLE SHELF (1)
K BASE (2)
L KEYBOARD FRONT (1)
M KEYBOARD BACK (1)
N RIGHT KEYBOARD SIDE (1)
O LEFT KEYBOARD SIDE (1)
P KEYBOARD UPRIGHT (1)
Q KEYBOARD SHELF (1)
R2 KEYBOARD BOTTOM (1)
S2 LARGE DRAWER FRONT (1)
W2 DRAWER FRONT (1)
M69 TOP MOLDING (1)
D78 LARGE DRAWER BACK (1)
D86 DRAWER BACK (1)
D212 RIGHT DRAWER SIDE (1)
D213 LEFT DRAWER SIDE (1)
D260 LARGE RIGHT DRAWER SIDE (1)
D263 LARGE LEFT DRAWER SIDE (1)
D707 DRAWER BOTTOM (2)
404944 www.sauder.com/servicesPage 2
å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts.
Part Identifi cation
Now you know
our ABCs.