Sauder Nova Loft 423720 - Assembly Step 6: Attach Back Panels and Brace

Page 10 www.sauder.com/service 423720
å
Carefully stand your unit upright.
å
NOTE: You will need a short screwdriver in this step.
å
Fasten a BRACE (Q) to the RIGHT UPRIGHT (C). Use a
BLACK 3/8" MACHINE SCREW (17).
å
Fasten the RIGHT BACK (F) to the BRACE (Q). Use a
BLACK 3/8" MACHINE SCREW (17).
å
Fasten the LEFT BACK (E) to the RIGHT BACK (F). Use a
BLACK 3/8" MACHINE SCREW (17) and a BLACK 5/8"
FLAT HEAD SCREW (15).
Step 6
BLACK 5/8" FLAT HEAD SCREW
(1 used in this step)
15
17
BLACK 3/8" MACHINE SCREW
(3 used in this step)
C
E
F
Q