Sauder Shoal Creek Night Stand 410412 User Manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-15
Français pg 16-18
Español pg 19-21
Lot # 359206 01/20/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987
Night Stand
Shoal Creek Collection | 410412
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
WARNING
CHOKING HAZARD - Small Parts
Not for children under 3 years.
Adult assembly required.

Sauder Shoal Creek Night Stand 410412 Specifications

General

Product Name	Sauder Shoal Creek Night Stand 410412
Category	Indoor Furnishing
Material	Engineered Wood
Assembly Required	Yes
Number of Drawers	1
Shelf Count	1

Summary

Product Overview and Safety

Important Safety Warning

Highlights Choking Hazard from small parts and requirement for adult assembly.

Visual Part Identification

Hardware Identification

Step 1: Initial Assembly

Prepare End and Bottom Panels

Insert twelve HIDDEN CAMS (T2) into the ENDS (A and B) and BOTTOM (D).

Insert Cam Dowels

Insert eight CAM DOWELS (U2) into the HIDDEN CAMS.

Step 2: Cabinet Assembly

Attach Cabinet Sides

Fasten CABINET RIGHT (35GA) and LEFT (35GB) to ENDS (A, B) using GOLD 5/16" FLAT HEAD SCREWS (CC).

Attach Rear Legs

Fasten REAR LEGS (H) to ENDS (A, B) using BLACK 2-1/4" FLAT HEAD SCREWS (Z).

Step 3: Attach Top Panel

Connect Left End to Top

Fasten the LEFT END (B) to the TOP (C) and tighten two HIDDEN CAMS.

Important Stability Caution

Warning against standing the unit upright without the back panel fastened.

Step 4: Attach Bottom and Right Side

Connect Bottom Panel and Molding

Fasten BOTTOM (D) to LEFT END (B) and slide BOTTOM MOLDING (O) onto BOTTOM (D).

Attach Right End Panel

Fasten RIGHT END (A) to TOP (C) and BOTTOM (D) using four HIDDEN CAMS.

Step 5: Add End Moldings

Secure Ends with Screws

Turn four BLACK 9/16" FLAT HEAD SCREWS (BB) into the ENDS (A and B).

Install End Moldings

Step 6: Attach Front Legs

Install Cam Screws in Legs

Connect Legs to Cabinet

Step 7: Attach Back Panel

Position Back Panel

Secure Back Panel with Nails

Step 8: Assemble Drawer Box

Insert Drawer Sides into Front

Attach Drawer Bottom and Back

Step 9: Attach Drawer Slides

Install Slide Cams

Attach Drawer Slides to Sides

Step 10: Install Drawer and Knob

Insert Assembled Drawer

Attach Drawer Knob

Important Safety Information

Overloading and Stability Risks

Television Placement Warning