Page 13www.sauder.com/service423720
Step 9
H
M
P
BLACK 1-3/4" FLAT HEAD SCREW
(2 used in this step)
11
BLACK 5/8" FLAT HEAD SCREW
(2 used in this step)
15
å
Fasten an UPPER REAR MOLDING (M) to the LEFT BACK (H).
Use two BLACK 5/8" FLAT HEAD SCREWS (15).
å
Fasten the LOWER REAR MOLDING (P) to the RIGHT
BACK (H). Use two BLACK 1-3/4" FLAT HEAD SCREWS (11).
These holes must be here.
To Next Page
Loading...
