Sauder Nova Loft 423720 - Page 23

Page 23www.sauder.com/service423720
Step 19
å
Fasten a PULL (7) to the FILE DRAWER BOX FRONT (AA). Use two BLACK 13/16" MACHINE SCREWS (14).
å
Fasten the FILE DRAWER FRONT (Z) to the FILE DRAWER BOX FRONT (AA). Turn four BLACK 7/8" HEX HEAD
SCREWS (13) with the L-WRENCH (8).
1
2
3
å
Fasten a FILE DRAWER SIDE (CC) to the FILE
DRAWER BACK (BB) and FILE DRAWER BOX FRONT (AA).
Use four BLACK 1-9/16" FLAT HEAD SCREWS (12).
å
Slide the LARGE DRAWER BOTTOM (EE) into the grooves
of the FILE DRAWER BACK (BB), FILE DRAWER BOX
FRONT (AA) and FILE DRAWER SIDE (CC).
å
Fasten the FILE DRAWER SIDE (CC) to the FILE
DRAWER BOX FRONT (AA) and FILE DRAWER BACK (BB).
Use four BLACK 1-9/16" FLAT HEAD SCREWS (12).
å
NOTE: Be sure the DRAWER BOTTOM inserts into the
groove of the DRAWER SIDE.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
12
BLACK 13/16" MACHINE SCREW
(2 used in this step)
14
BLACK 7/8" HEX HEAD SCREW
(4 used in this step)
13
BB
BB
AA
AA
AA
Z
7
CC
CC
Groove
Groove
EE
8
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this step)
12