Sauder Nova Loft 423720 - Assembly Step 22: Insert Drawers and Final Steps

Page 26 www.sauder.com/service 423720
Step 22
å
To insert the drawers into your unit, tip the front of the drawer down and drop the rollers on the drawers behind the
rollers on the unit. Lift the front of the drawers up and slide them into the unit.
å
To insert the fi le drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on
the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the
way in, then it will slide in and out easier.
å
To make adjustment the DRAWERS, loosen the screws with the L-WRENCH, make adjustments and tighten the screws.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
Place the roller on the SLIDE
behind the roller on the RAIL.
And to celebrate, why not share your success story at sauder.com or
50 lbs.
50 lbs.
15 lbs.
25 lbs.
25 lbs.
25 lbs.
35 lbs.