Sauder WHISKER - Page 31

With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
å
Fasten the LEFT DRAWER FRONT (O) to the DRAWER SIDES (R and S). Tighten four
HIDDEN CAMS.
å
NOTE: Be sure the DRAWER BOTTOM (U) inserts into the groove of the LEFT
DRAWER FRONT (O).
å
Repeat this step using the RIGHT DRAWER FRONT (P).
å
Fasten the DRAWER SIDES (R and S) to the
DRAWER BACK (T). Use four 1-3/16" FLAT
HEAD SCREWS (19) .
å
Slide a DRAWER BOTTOM (U) into the
grooves in the DRAWER SIDES (R and S) and
DRAWER BACK (T).
Groove
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
1 2
3
S
R
T
1-3/16" FLAT HEAD SCREW
(8 used in this step)
19
U
S
R
T
U
S
R
O
Unfinished surface
429610whiskersupport.com Page 31
STEP 26