To Next PageTo Next Page
Need help?Do you have a question about the Saunacore Steamcore Pro Series and is the answer not in the manual?
Inspect product upon receipt for any damage sustained during shipping and file claims if necessary.
Details mandatory requirements for safe and correct generator installation, including material use and placement.
Lists all components included with the steam generator unit for installation.
Provides a comprehensive list of tools required for the installation process.
Emphasizes reviewing all instructions and verifying model/accessories before beginning installation.
Instructions for installing the supplied 15 psi safety valve by a qualified plumber.
Outlines essential requirements for steam room enclosure, materials, and sealing for optimal performance.
Specifies ventilation ratios and placement for steam rooms based on usage duration.
Provides instructions on where to locate the steam generator unit for optimal function and accessibility.
Explains how to calculate room volume and select the appropriate steam generator size based on wall finishes.
Specifies how to orient and position the steam generator unit for correct operation.
Details plumbing requirements, materials, pressure, and connection procedures for water supply.
Outlines electrical wiring requirements, conductor types, circuit breakers, and grounding.
Specifies steam line diameter, unions, pitching, and steam head placement for optimal steam distribution.
Instructions for connecting the gravity drain line, ensuring proper slope and avoiding blockages.
Steps for testing the steam generator after installation, including leak checks and initial operation.
Explains the automatic rinse and flush feature for certain models and manual operation.
Discusses the importance of filtration and optional secondary systems to prevent mineral buildup.
Outlines recommended periodic maintenance, including drain valve flushing and cleaning.
Further details on the automatic rinse and flush operation to reduce mineral deposits.
Specifies drainage pipe requirements, temperature, and slope for safe water discharge.
Guidelines for cleaning steam room seats, walls, and floors using appropriate methods.
Recommends comfortable temperatures and provides advice for enjoying the steam bath experience.
Illustrates the plumbing setup for residential Elegance model steam generators.
Specific instructions and diagram for installing the Elegance steam head.
Illustrates plumbing configurations for commercial Elegance model steam generators.
Instructions for installing the 15 psi pressure relief valve and using sealant.
Diagram and note emphasizing the avoidance of steam traps in the steam line.
Important warnings regarding the use of essential oils, including concentration and potential irritants.
Introduces the SSI control system and its basic installation considerations.
Guidelines for locating the control panel and determining electrical box requirements.
Provides dimensional specifications for the SSI and SSII control panels.
Detailed steps for installing the controller, including drilling, wire routing, and connection.
Specific instructions for installing the temperature sensor for the SS I control panel.
Diagram showing the layout and functions of the SS I control panel buttons and display.
Explains how to power on/off the SS I control and its basic water level and heating functions.
Instructions for operating mood lighting, steam time, and temperature settings on the SS I control.
Diagram showing the layout and functions of the SS II control panel buttons and display.
Explains how to power on/off the SS II control and its default steam settings.
Instructions for adjusting time and temperature settings on the SS II control panel.
How to turn the light function on/off and what the display shows.
Guidelines for performing essential maintenance tasks like water discharge and cleaning.
Important safety warnings for using the steam bath, especially for specific health conditions.
Details on manual and automatic color changes, and default timer settings for mood lighting.
Provides working conditions, voltage, frequency, and current ratings for the mood light system.
Illustrates the electrical wiring connections for 208V 3-phase Steamcore Celg models.
Lists technical specs like watts, max cubic feet, voltage, and steam head sizes for residential models.
Lists technical specs for commercial models, including watts, volume, voltage, and steam head sizes.
Covers initial checks like wiring, installation, drainage, filter, pipe noise, and bends.
Addresses issues like slow heating, hot water/low steam, erratic production, and no steam/heat.
Details issues related to steam room temperature maintenance and steam head flow variations.
A table summarizing common problems, their causes, and solutions.
Outlines the limited warranty for Pro-Series steam generators, including coverage and exclusions.
Procedures for obtaining warranty service, required documentation, and claim fees.
General