To Next PageTo Next Page
Need help?Do you have a question about the Saunier Duval Exabox 7D and is the answer not in the manual?
Explains comfort, economic, and frost protection temperature levels for heating control.
Mentions 3 pre-registered and 1 free program for lifestyle adaptation.
Notes easy maintenance and direct power from the boiler.
Covers +/- buttons, mode selection, and holiday absence button.
Details indicators for temperature levels, day of week, and heating status.
Explains current time and ambient temperature display.
Covers buttons for day selection (1-7) and programme selection (P1-P4).
Details buttons for setting comfort/reduced temps, time, and validation/reset.
Specifies installation height, wall type, and mounting the base.
Mentions connecting the device according to the diagram.
Covers setting the saving battery switch and selecting North/South programmes.
Explains direct connection, operation when boiler is off, and automatic switch-on.
Describes initial operation by sliding cover and pressing RESET.
Lists technical details like temperature ranges, supply, battery life, and operating conditions.
Guides on setting current day and time using +/- buttons and validation.
Explains how to change the time or day after initial setting.
Instructions to set the desired comfort temperature using +/- buttons.
Instructions to set the desired economic (reduced) temperature.
Describes 3 pre-recorded programs (P1-P3) and a blank program (P4).
Details the comfort and reduced periods for pre-recorded programs P1, P2, P3 in the North version.
Details the comfort and reduced periods for pre-recorded programs P1, P2, P3 in the South version.
Explains how to select and confirm pre-recorded programs P1, P2, P3 for the week.
Guides on creating a personalized heating program by setting comfort/reduced periods.
Explains how to validate the custom P4 program settings.
How to check the programmed heating schedule for each day in automatic mode.
Instructions to return to automatic mode by pressing the 'MODE' button.
How to temporarily increase the heating temperature using the '+' button.
How to temporarily decrease the heating temperature using the '-' button.
Explains that temporary modifications end at the next programmed change.
Transforms the device into a simple thermostat for constant temperature control.
How to adjust a constant temperature between 5°C and 30°C using +/- buttons.
Instructions to exit manual (MANU) mode and return to automatic mode.
How to view the total number of hours the boiler has been running.
How to reset the running hours counter to zero.
Protects dwelling from frost by maintaining a minimum temperature during absences.
How to set the length of absence (1-99 days) and temperature level.
How to validate holiday mode settings and return to automatic mode.
General| Compatibility | Saunier Duval boilers |
|---|---|
| Display | LCD |
| Programming | Weekly programming |
| Temperature Range | 5°C to 35°C |
| Communication | Wireless |
| Connectivity | RF |
