EasyManua.ls Logo

SAUTHON easy TOKYO XV111A - User Manual

Default Icon
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Livret technique à conserver
Technical manual to keep
10-31-1969 / Cette entreprise a fait certifier sa chaîne de contrôle / pefc-france.org
SAUTHON Industries S.A. au capital de 3.000.000 €
RCS Guéret B421 195 298 - Code NAF 3109 B
Z.I. Cher-du-Prat - B.P. 317 - 23007 GUERET
e-mail: info@sauthon.fr - www.sauthon.com
GB -
GB -
F -
F -
Livré démonté : 2 colis
À monter soi-même
Knocked down : 2 parcels
Self assembly
396034
édition 11.23
TOKYO XV111A
À
LIRE
ENTIÈREMENT
AVANT LE MONTAGE
Lit bébé 140x70 Cot 140x70
Avertissements
Attention au danger de placer le lit à proximité de ammes nues et d’autres
sources de forte chaleur, comme les appareils de chau󰀨age électrique, les
appareils de chau󰀨age à gaz, etc. Ne placez pas le lit à proximité d’une fenêtre
ou d’autres meubles.
Ne pas utiliser le lit si certains éléments sont cassés, endommagés ou
manquants, et n’utilisez que des pièces détachées approuvées par le fabricant.
Ne rien laisser dans le lit et ne pas le placer à coté d’un produit qui pourrait
fournir une prise pour les pieds de l’enfant ou présenter un danger d’étou󰀨ement
ou d’étranglement, par exemple des celles, des cordons de rideaux, etc.
Ne pas utiliser plus d’un matelas dans le lit.
Recommandations
Le lit ne peut être prêt à l’emploi qu’une fois les mécanismes de verrouillage
pleinement enclenchés. Cet enclenchement est à vérier avant d’utiliser le lit.
Dés que votre enfant est en âge de s’asseoir, régler le sommier dans la position
la plus basse, cette position étant la plus sûre.
Ce lit est prévu pour être équipé d’un matelas 140 x 70 cm. L’épaisseur du
matelas doit être telle que la hauteur intérieur (c’est-à-dire la distance entre la
surface du matelas et la partie supérieur du cadre du lit) soit d’au moins 500
mm dans la position la plus basse du sommier et d’au moins 200 mm dans
sa position la plus haute. Un marquage dans votre lit vous indique l’épaisseur
maximal du matelas à utiliser lorsque votre sommier est en position haut.
Les meubles à monter doivent être assemblés par un adulte et jamais par
un enfant car certaines pièces présentent un risque d’étou󰀨ement. Un soin
particulier doit être apporté sur les dispositifs d’assemblage qui doivent toujours
être convenablement serrés, régulièrement contrôlés et resserrés si nécessaire.
Conseils d’entretien : Dépoussiérage chi󰀨on sec ; ni alcool, ni solvant.
Taches rebelles : éponge légèrement humide.
Pour tout déplacement, les meubles doivent être impérativement soulevés et
non poussés ou tirés.
Attention : Lorsque votre enfant est capable de sortir seul du lit, le lit ne doit plus
être utilisé pour cet enfant.
Disclaimers
To avoid any risk of re, don’t place the cot near open ames
and other sources of high warmth supply as electric or gas
heating, etc. Do not place the bed near a window or near
other items of furniture. Don’t use the cot if there are broken,
damaged or missing parts, and use only spare parts approved
by the manufacturer. Don’t leave anything in the cot and don’t
place it next to a product that could provide a hold for the feet of
the child or be a danger of su󰀨ocation or strangulation, such as
strings, cords curtains, etc…
Don’t use more as a mattress in the cot.
Recommendations
The cot is ready to use only after the locking mechanisms have
been fully engaged.
As soon as your child is old enough to sit down, set the bed
base in the lowest position, this position is the safest.
This cot is expected to be equipped with a mattress 140 x 70
cm. The thickness of the mattress must be such that the internal
height, i.e. the distance between the surface of the mattress
and the upper part of the cot, is at least 500 mm in the lowest
position of the bed base and at least 200 mm in its highest
position.
Furnitures must be assembled by an adult due to su󰀨ocation
risk. Care must be provided on the clamping screw assembly
which must be regularly checked and tightened if necessary.
Dust with dry cloth : no alcohol nor solvents. Hard to remove
stains : slightly damp sponge.
The furniture must always be lifted when moving it.
Be careful: If your child is able to leave alone the cot bed, the
bed should no longer be used for this child.
A LIRE SOIGNEUSEMENT
F
IMPORTANT - A
CONSERVER POUR
CONSULTATION
ULTERIEURE
Respecter les instructions de montage et les conseils
d’utilisation suivants :
TO READ CAREFULLY
GB
Be aware and respect the assembling
instructions and the following uses advice
IMPORTANT TO
RETAIN FOR
FUTURE
CONSULTING
Norme EN 716 - 1 & 2
Temps de montage
Assembly duration
x2
Outillage nécessaire
Needed tools
45mn
CONSEIL Il est recommandé de mettre une protection au sol
pour manipuler les pièces.
ADVICE Put a protection on the oor to handle parts.
76cm
87cm
144cm
Question and Answer IconNeed help?

Do you have a question about the SAUTHON easy TOKYO XV111A and is the answer not in the manual?

Overview

This document is a technical manual for the SAUTHON easy. TOKYO XV111A cot, designed for self-assembly. It provides comprehensive instructions for assembly, usage, safety warnings, and maintenance guidelines.

Function Description

The SAUTHON easy. TOKYO XV111A is a baby cot designed to provide a safe sleeping environment for infants. It is a self-assembly product, delivered in two parcels, and is intended for use with a mattress of specific dimensions. The cot features an adjustable bed base with three positions, allowing it to adapt as the child grows. The lowest position is recommended for safety once the child can sit up.

Important Technical Specifications

  • Model: TOKYO XV111A
  • Product Type: Cot (Lit bébé)
  • Dimensions: Designed for a mattress of 140 x 70 cm.
  • Assembly Duration: Approximately 45 minutes.
  • Number of Parcels: 2 (delivered knocked down).
  • Bed Base Positions: 3 adjustable positions.
  • Mattress Thickness: The internal height (distance between mattress surface and top of cot frame) must be at least 500 mm in the lowest bed base position and at least 200 mm in the highest position. A marking on the cot indicates the maximum mattress thickness for the high position.
  • Compliance: Conforms to EN 716 - 1 & 2 standards. It also complies with the requirements of the French decree n°91-1292 of 20.12.1991, regarding infant care articles. Safety labels on the product must not be removed.
  • Materials: The product is PEFC certified (10-31-1969), indicating sustainable forest management.

Usage Features

  • Self-Assembly: The cot is designed for self-assembly by an adult. Necessary tools are illustrated (screwdriver, hammer). A protective surface on the floor is recommended during assembly to prevent damage to parts.
  • Adjustable Bed Base: The bed base can be set to three different heights. The lowest position is the safest and should be used once the child is able to sit up independently.
  • Safety Mechanisms: The locking mechanisms must be fully engaged before using the cot. These mechanisms should be checked regularly.
  • Child Development Adaptation: The cot is suitable for use until the child is able to climb out of it independently. Once the child can exit the cot alone, it should no longer be used for that child.
  • Placement Guidelines:
    • Do not place the cot near open flames or other sources of intense heat (e.g., electric or gas heaters).
    • Avoid placing the cot near windows or other furniture that could provide a foothold for the child or pose a risk of entanglement (e.g., strings, curtain cords).
    • Do not leave anything inside the cot that could present a risk of suffocation or strangulation.
    • Only one mattress should be used in the cot.
    • Only use spare parts approved by the manufacturer if any components are broken, damaged, or missing.

Maintenance Features

  • Cleaning:
    • Dusting should be done with a dry cloth.
    • Avoid using alcohol or solvents for cleaning.
    • For stubborn stains, use a slightly damp sponge.
  • Assembly Integrity: Assembly devices (screws, studs) must always be properly tightened, regularly checked, and re-tightened if necessary. Particular care should be taken with clamping screw assemblies.
  • Moving the Cot: When moving the furniture, it must always be lifted, not pushed or pulled, to prevent damage.
  • Disposal: The manual encourages responsible disposal or recycling of furniture, suggesting options like associations, stores, or waste collection centers (déchèterie). Information on waste management is provided via a QR code linking to https://quefairedemesdechets.fr.

Safety Warnings and Recommendations (Summarized)

  • Ensure all locking mechanisms are fully engaged before use.
  • Adjust the bed base to the lowest position once the child can sit up.
  • Do not use the cot if any parts are broken, damaged, or missing; use only manufacturer-approved spare parts.
  • Keep the cot away from heat sources, windows, and items that could pose a strangulation or suffocation risk.
  • Do not use more than one mattress.
  • Furniture assembly must be performed by an adult due to the risk of choking on small parts.
  • Regularly check and tighten all assembly devices.
  • Stop using the cot when the child can climb out independently.
  • During assembly, do not force studs; if necessary, unscrew and re-screw to align.

SAUTHON easy TOKYO XV111A Specifications

General IconGeneral
BrandSAUTHON easy
ModelTOKYO XV111A
CategoryBaby & Toddler Furniture
LanguageEnglish

Related product manuals