EasyManua.ls Logo

Savage LED-SB-UP User Manual

Savage LED-SB-UP
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
professional photography made simple
800.624.8891 savageUniversal.com
LIGHT STANDS
Unpack each light stand and loosen leg locks. Pull the upright section
upwards while pushing the leg bracket down to extend the tripod legs.
Tighten the knob on the leg bracket to secure the base. Loosen and
extend each upright section to your desired height, then tighten to lock.
Set the light on the top pin of the stand, and tighten the side knob of
the light stand adapter to secure the light in place.
AC POWER CORD
Thread the included AC power cord into the AC receiver on the back of
the light. Plug into nearby wall plug. Switch the “On/Off” button to the
“On” position. The LED back z should illuminate.
SOFTBOX ATTACHMENT
Unpack and open each softbox with care.
Softboxes will open rapidly after tight packaging.
Line up softbox opening with LED light head, and stretch and pull over
the light head until it ts snugly over the light.
Attach diffusion sheet to the front of the softbox by aligning the
Velcro edges to the corners of the softbox, and press rmly to
attach all edges.
ATTACH AC POWER CORD
OPEN LIGHT STANDS
& MOUNT LIGHT HEAD
OPEN & UNFOLD SOFTBOX
STRETCH SOFTBOX OPENING OVER LIGHT HEAD
ATTACH FRONT DIFFUSER TO SOFTBOX VELCRO EDGES
RGB PORTRAIT KIT
USAGE INSTRUCTIONS
®
®
Question and Answer IconNeed help?

Do you have a question about the Savage LED-SB-UP and is the answer not in the manual?

Savage LED-SB-UP Specifications

General IconGeneral
Power SourceAC Adapter
DimmingYes
Input Voltage100-240V
TypeLED
Beam Angle120°
Weight1 kg

Summary

RGB Portrait Kit Setup and Softbox Attachment

Light Stand Setup

Instructions for unpacking, extending, and securing the light stand for use.

AC Power Connection

Steps to connect the AC power cord and turn the light on.

Softbox Attachment and Diffusion

Guide to attaching the softbox to the light and adding the diffusion sheet.

Rear Panel Controls and Mode Operation

Rear Panel Controls Overview

Description of the rear panel buttons, indicators, and adjustment knob.

Operating in RGB Mode

Instructions for selecting and adjusting colors, hue, and saturation.

Operating in CCT Mode

Guide to adjusting color temperature and brightness for correction.

Smartphone App Control and Modes

App Pairing and Basic Controls

Connecting the app, renaming lights, and basic adjustments.

Advanced App Functions

Using hue/saturation, color temperature wheels, and saving presets.

Special Modes: Music and Patterns

Controlling light effects with music and various pattern presets.

Managing Lights and Troubleshooting

Managing Multiple Lights

Instructions for naming, grouping, and controlling multiple lights via the app.

Troubleshooting: App and Connectivity

Resolving issues like erratic behavior, pairing, and cache problems.

Troubleshooting: Functionality Issues

Fixing problems with music sync, mood function, and specific controls.