3
5. End of capacity alert
The DigiFlow 8300T generates an audible alert and the digits on the LCD blinks when its
remaining capacity reaches zero or minus.
6. Resetting
Press the “RESET” button for three seconds, the “rESEt” on the LCD blinks twice, and the
remaining capacity is reset to the original programming value.
7. Low battery power alert
When the battery power is low, the DigiFlow 8300T generates an audible alert and the empty
battery symbol on the right-up corner of the LCD blinks. The alert status will be released when
the batteries are replaced by new batteries. The data of the last status will be memorized and
stored back.
To Previous Page
Loading...
Need help?
General
