Savant GE SST-W300 Quick Reference Guide

GE Sma Thermostat - Works with Savant QRG | 009-2334-01 1 of 4 45 Perseverance Way, Hyannis MA 02601
Copyright ©2023 Savant Systems, Inc | 071023 Savant.com | 508.683.2500
Front Panel ControlsBox Contents
(1) GE Sma Thermostat (SST-W300-xx)
(2) Drywall Anchor (039-0700-00)
(2) #6 x 1 inch pan head screws (039-0701-00)
(1) Thermostat Wall Plate (074-2759-00)
(1) Wire Labels Sheet (080-1301-00)
(1) Backplate (074-2758-00)
(1) Power Extender Kit (PEK) (169-0608-00)
(1) Product and Regulatory Inse (009-2086-xx)
(1) Quick Reference Guide (009-2334-xx)
Specifications
A
Increase or decrease temperature setpoint.
B
Fan Mode - Cycles through ON and AUTO fan modes.
C
HVAC Mode - Cycles through COOL, HEAT, AUTO, and OFF HVAC
modes.
D
Hold Status - Cycles through Hold Modes. See
L
for more
information on mode descriptions. Set HVAC mode to OFF, then
press and hold for 10 seconds to reset to factory defaults.
NOTE: If the screen is in sleep mode, press any key to wake up
the device before operation.
Dimensions and Weights
Height Width Depth Weight
SST-W300
3.25 in
(8.25 cm)
5.25 in
(13.3 cm)
1.0 in
(2.54 cm)
.14 lbs
(.07 kg)
Shipping
7.75 in
(19.7 cm)
7.63 in
(19.4 cm)
4.25 in
(10.8 cm)
.14 lbs
(.07 kg)
Standards
Wireless
802.11 b/g/n (2.4 GHz)
IMPORTANT! 802.11r fast roaming is not
suppoed.
Security WPA1™, WPA2™, WPA1™ +WPA2™
Regulatory
Safety and
Emissions
FCC Pa 15 Class B
Contains FCC ID: PUU-CTHMCAPEKB1
Contains IC: 10798A-CTHMCAPEKB1
RoHS Compliant
Minimum Suppoed Release
Savant OS da Vinci 10.3.1
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Power
Input
24 V AC (C wire required. If there is no C wire, use
included Power Extension Kit.)
PEK Input 20-30 V AC
Amp Rating Max. 1A per terminal
Additional Information
To view available documentation, detailed product specs, and more,
Visit the Savant Knowledge tab via the Savant Customer Community
to search all Savant documentation.
A
B
C
D
Front Panel LED Modes and Indicators
E
Heating/Cooling Status - Current status of heating/cooling
system.
F
Cooling Setpoint - Targeted temperature when COOL or
AUTO Mode is active.
G
Heating Setpoint - Targeted temperature when HEAT or
AUTO Mode is active.
H
Auxiliary Heat - Heat pump’s auxiliary heat is active.
I
Emergency Heat - Emergency heat mode is active.
J
Fan Mode - Whether the fan is in AUTO or ON mode.
K
System Mode - Current system status: COOL/HEAT/AUTO/OFF
L
Hold Status
– SCHEDULE: Runs the set schedule created in the
Savant App
– HOLD: Manually overrides all scheduled changes and
holds temperature constant
– TEMPORARY: Manually overrides all scheduled
temperature changes until next scheduled event
M
Setup Mode - Whether Setup Mode is active or not
N
Wi-Fi Status - Current Wi-Fi connection status
E
F
G
H
I
J K
M
L
N
GE Sma Thermostat - Works with Savant (SST-W300)
Quick Reference Guide

Savant GE SST-W300 Specifications

General

Type	Smart Thermostat
Humidity Sensor	Yes
Remote Access	Yes, via Savant App
Multi-stage Heating/Cooling	Yes
Geofencing	Yes
Energy Usage Reports	Yes
Installation	Professional installation recommended
Connectivity	Wi-Fi
Power Source	24VAC
Temperature Range	4°C to 37°C
Voice Control	Yes