Savant GE SST-W300 User Manual

Copyright © 2023 Savant Systems, Inc. 1 of 21 45 Perseverance Way, Hyannis MA 02601
savant.com | 508.683.2500
Document Number: 009-2377-00
Document Date: August 2023
Document Suppos: SST-W300
GE Sma Thermostat, Works with Savant (SST-W300)
Deployment Guide
This guide assists an installer/integrator through the process needed to deploy the SST-W300 GE Sma Thermostat into a Savant Pro System. Before staing, refer to the thermostat's Quick
Reference Guide for technical specifications, mounting instructions, and basic wiring.
Each of the items listed below is covered in this document.
– Advanced HVAC wiring diagrams.
– Power Injector wiring (if needed).
– How to add/provision the thermostat to the local Wi-Fi network.
– How to configure the thermostat using the Savant Power & Light App.
– How to add the thermostat to a Blueprint configuration and upload file to the Savant Host.
– How to configure the thermostat when there is no Wi-Fi access
– How to reset the thermostat and clear the network configuration.
– Basic thermostat front panel user Inteace procedures.

Savant GE SST-W300 Specifications

General

Type	Smart Thermostat
Humidity Sensor	Yes
Remote Access	Yes, via Savant App
Multi-stage Heating/Cooling	Yes
Geofencing	Yes
Energy Usage Reports	Yes
Installation	Professional installation recommended
Connectivity	Wi-Fi
Power Source	24VAC
Temperature Range	4°C to 37°C
Voice Control	Yes

Summary

Important Safety Information

Electric Shock Prevention

Details potential electrical hazards and necessary precautions during installation and operation.

Weight Injury Prevention

Highlights the need for two installers for safe handling of equipment to prevent injury.

Before You Begin

Deployment Steps

Related Documentation

Wiring

Installing or Removing Wire from Thermostat

Step-by-step guide on safely connecting and disconnecting wires from the thermostat terminals.

Wire Designation Descriptions

Provision Thermostat to Wi-Fi

Program HVAC System Type

Thermostat Settings

Add Thermostat to Blueprint

Add Profile to Blueprint

Steps to add the thermostat's profile to a Blueprint configuration from the components library.

Add UID to Inspector

Instructions for entering the thermostat's unique identifier (UID) into the Blueprint inspector.

Make Blueprint Connections

How to establish network and control connections for the thermostat within Blueprint.

Save Configuration and Upload

Savant App Control

Front Panel Indicators

Troubleshooting and Compatibility

Compatibility

Details HVAC system types and configurations compatible with the GE Smart Thermostat.

Appendix A: HVAC Data Table

Appendix B: Reset Network and Configuration

Reset Thermostat from Front Panel

Steps to clear Wi-Fi connection and thermostat configuration using the thermostat's front panel.

Appendix C: Configure Without Wi-Fi