EasyManua.ls Logo

Savant HCX-4KHDR100 User Manual

Savant HCX-4KHDR100
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Transmitter
TX RX G TOSLINK OUTHDMI INIR OUTIR IN
L R G
AUDIO OUT
POWER STAT US HDCP LINK
Front Panel
Rear Panel
M
A B
C D E
F G H I J K L
A
Power LED
O: Device is o. No power applied.
Red: Main board is powered.
B
Status LED
O: HDBaseT processor is not running.
Blinking Blue: HDBaseT processor is running.
C
HDCP LED
O: No HDMI stream.
Blue: HDCP present in HDMI stream.
Rapid Blinking Blue: Non-encrypted HDCP
signal.
D
Link LED
O: No connection established.
Blue: Connection established between
Transmitter and Receiver.
E
Audio Out 3-pin analog audio output
F
Power Input
12V DC locking power connection.
(Only one power connection needed.)
G
HDBaseT Out RJ-45 HDBaseT connection.
H
IR In
3.5 mm IR input for IR pass-through. Transmits
IR signals via an IR Flasher (5V tolerant) to
devices with an IR input or IR receiver.
I
IR Out
3.5 mm IR output connection. Transmits IR
signals via an IR Flasher (5V tolerant) to
devices with an IR input or IR receiver.
J
RS-232
3-pin Control Connector. Transmits and receives
serial data to and from serial controllable
devices. For pin-out information,
refer to the RS-232 Wiring section below.
K
HDMI In
19-Pin Type A HDMI female digital audio/video
input. Supports HDMI 2.0b HDMI 2.0 complaint
cable required for 4K content.
L
Ethernet
RJ-45 10/100 Base-T, auto-negotiating port
with Link/Activity LEDs.
For use of pass-through of network connection.
Link LED:
O: Ethernet link is not established.
Green Solid: Ethernet link is established.
Activity LED:
O: No Activity
Green Blinking: Activity (Rx/Tx)
M
TOSLink Out Digital optical output.
Specifications
Environmental
Temperature 32° to 113° F (0° to 45° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Dimensions and Weights
Height 0.82 in (2.1 cm)
Width 7.68 in (19.5 cm)
Depth 3.73 in (9.5 cm)
Weight Shipping 4.20 lb (1.91 kg)
Power
Input Power 12V DC 3A
Power
Consumption
27 Watts (maximum)
Power over
HDBaseT (PoH)
Can be used to power the second device.
Video
HDR Supported
Supported
Formats
800x600
1024x768
1280x760
1280x800
1280x960
1280x1024
1360x768
1366x768
1440x900
1600x900
1600x1200
1680x1050
1920x1080
1920x1200
3840x2160
1,2,3,4
4096x2160
1,2,3,4
1 = at 24 Hz | 2 = at 25 Hz | 3 = at 30 Hz | 4 = at 60 Hz
Audio
Supported
Formats
Pass-through of all HDMI audio formats are
supported.
Compliance
Safety and
Emissions
FCC Part 15 CE C-Tick
RoHS Compliant
HCX-4KHDR100 | 009-1674-00 | 180906
Copyright 2018 Savant Systems, LLC
1 of 2 45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
Box Contents
(1) HDBaseT Transmitter
(1) HDBaseT Receiver
(1) Power Cords (Regional adapters included)
(1) Power Supply
(4) Brackets
(3) 3-pin Control Connector
(1) IR Emitter
(1) IR Connector Cable
(1) IR Receiver
(1) Regulatory Card
HDBaseT Extenders with 4K HDR up to 100M (HCX-4KHDR100)
Quick Reference Guide
Question and Answer IconNeed help?

Do you have a question about the Savant HCX-4KHDR100 and is the answer not in the manual?

Savant HCX-4KHDR100 Specifications

General IconGeneral
BrandSavant
ModelHCX-4KHDR100
CategoryExtender
LanguageEnglish

Summary

Specifications

Environmental Specifications

Operating temperature and humidity ranges for the device.

Physical Dimensions and Weight

Physical dimensions and shipping weight of the extender unit.

Power Specifications

Input power voltage, current, and consumption details.

Supported Video Formats

Supported video resolutions and refresh rates.

Supported Audio Formats

Supported audio formats passed through via HDMI.

Compliance and Certifications

Safety, emissions, and RoHS compliance information.

Transmitter Overview

Transmitter Front Panel

Front panel indicators for Power, Status, HDCP, and Link.

Transmitter Rear Panel - Power LED

Power status indicator: Off (no power), Red (powered).

Transmitter Rear Panel - Status LED

HDBaseT processor status: Off (not running), Blue (running).

Transmitter Rear Panel - HDCP LED

HDCP status: Off (no stream), Blue (HDCP present), Blinking Blue (non-encrypted).

Transmitter Rear Panel - Link LED

Connection status: Off (no link), Blue (link established).

Transmitter Rear Panel - Audio Out

3-pin analog audio output connector.

Transmitter Rear Panel - Power Input

12V DC locking power connector.

Transmitter Rear Panel - HDBaseT Out

RJ-45 HDBaseT connection port.

Transmitter Rear Panel - IR In

3.5 mm IR input for IR pass-through.

Transmitter Rear Panel - IR Out

3.5 mm IR output connection.

Transmitter Rear Panel - RS-232

3-pin Control Connector for serial data.

Transmitter Rear Panel - HDMI In

19-Pin Type A HDMI digital audio/video input.

Transmitter Rear Panel - Ethernet

RJ-45 10/100 Base-T Ethernet port.

Receiver Overview

Receiver Front Panel

Front panel indicators for Power, Status, HDCP, and Link.

Receiver Rear Panel - Power LED

Power status indicator: Off (no power), Red (powered).

Receiver Rear Panel - Status LED

HDBaseT processor status: Off (not running), Blue (running).

Receiver Rear Panel - HDCP LED

HDCP status: Off (no stream), Blue (HDCP present), Blinking Blue (non-encrypted).

Receiver Rear Panel - Link LED

Connection status: Off (no link), Blue (link established).

Receiver Rear Panel - Audio Control

Selector switch for Audio Return Channel (ARC) or TOSLink Input.

Receiver Rear Panel - Power Input

12V DC locking power connector.

Receiver Rear Panel - HDBaseT In

RJ-45 HDBaseT connection port.

Receiver Rear Panel - IR In

3.5 mm IR input for IR pass-through.

Receiver Rear Panel - IR Out

3.5 mm IR output connection.

Receiver Rear Panel - RS-232

3-pin Control Connector for serial data.

Receiver Rear Panel - HDMI Out

19-Pin Type A HDMI digital audio/video output.

Receiver Rear Panel - Ethernet

RJ-45 10/100 Base-T Ethernet port.

Receiver Rear Panel - TOSLink In

Digital optical input.

Wiring and Installation

IR Wiring

Details for IR control pass-through via emitter and connector.

RS-232 Wiring

RS-232 control signal pass-through wiring using 3-pin connector.

Installation Guide

Steps for installing mounting brackets on the extender device.

HDBaseT Cable Information

Recommended cable types and maximum transport distances for 4K and 1080P.

Related product manuals